Disclaimer

The content of this site has been prepared by the members of the thematic network "S2S - A Gateway for Plant and Process safety". Since the conditions of use are beyond our control we disclaim any liability, including patent infringement, incurred in connection with the use of these products, data or suggestions.

The thematic network S2S is a European Community Project carried out in the "Competitive and Sustainable Growth" programme and funded in part by contract number G1RT-CT-2002-05092.
 

Search S2S Web Portal

 

in   

Logic operation in search term:  Conjunction (AND)    /    Disjunction (OR)
Search in:   
Training Full text
Resources / Downloads
Research projects Full text, Country: , Keywords:
Legislation & Standardisation Country: , Keywords:
Web Links Keywords:
Glossary Full text
 

Training

7 entries found!

Accuracy of safety valve two-phase mass flow capacity sizing in case of single-component steam/water, resp., refrigerant R 134a flow service

Case study 3: Agitated Kettle with Bottom Valve - Solutions

Case study 3: Agitated Kettle with Bottom Valve - Questions

Case study 3: Agitated Kettle with Bottom Valve Description

On the applicability of laboratory heterogeneous liquid-liquid phase reaction kinetic data for technical scale relief vent sizing

Reproductive accuracy of safety valve two-phase mass flow capacity models in case of air/water, resp., viscous liquid flow duty

What do you do with the answer?


142 entries found!

01 - Accident caused by an inexact P&I connected also to a fatality

02 - Fire on a hot oil furnace

03 - Fire in a chemical additive container

Activity 1

Activity 3

Activity 4

Airborne concentrations of interest - ERPG/EEPG

Application of Safety Measures

ATEX Directives - 10. Standards

ATEX Directives - 2. Requirements for manufactureres and users

ATEX Directives - 3. Hierarchy of EC-Directives and relationship

ATEX Directives - 4. Contents of ATEX 94/9/EC

ATEX Directives - 5. Equipment (ATEX 94/9/EC)

ATEX Directives - 6. Contents of ATEX 99/92/EC

ATEX Directives - 7. Additonal requirements, explosion protection document and Zone definitions

ATEX Directives - 8. Risk Assessment and Hazard Identification- I

ATEX Directives - 9. Risk Assessment and Hazard Identification- II

ATEX Directives - Example Use of Checklists for Hazard Identification

Available training pages

Basic Reactor Assessment Model

Batch Reactor (BR)

Building 1

Building 2

Building 3

Building 8

Capabilities of the method

Case study 1: Crystallization Kettle - Solutions

Case study 2: Charge Hopper of a Paddle Drier - Incident description

Case study 2: Charge Hopper of a Paddle Drier - Solutions

Characteristic Numbers

Consequence Evaluation Approaches for LOPA

Continuously Stirred Tank Reactor (CSTR)

Desk screening - Public Literature

Desktop methods - CHETAH

Desktop methods - reactive groups

Emergency response 1

Emergency response 2

Emergency response 3

Exploring your process activities

Fault Tree Analysis

Figure X

Figure X

Figure Y

FTA example

Fuel 3

HarsBook

Hazardous substances and processes

Hazards to assess

Introduction

Introduction

Introduction

Introduction to static electricity case studies

LOPA - Layer of Protection analysis (first draft)

LOPA Introduction

Management of Change

MOC example

Organization 2

Organization 5

Overview

Overview

Oxygen Balance

Plug Flow Tube Reactor (PFTR)

Safety data

Safety measures

Safety valve sizing for highly viscous flow according to EN ISO 4126-4 and industrial practice

Screening Methods

Screening Tests: atmosphere inside the crucible

Screening Tests: scanning rate

Screening Tests: type of crucibles

Semi-Batch Reactor (SBR)

Seveso II

Start

STEP 1: Identify the consequence

STEP 2: Determine the Risk Tolerance Criteria

STEP 3: Accident Scenario

STEP 4: Initiating Event Frequency

STEP 7: Independent Protection Layers

STEP 8: Frequency of Mitigated Consequence

Stoessel Diagram

Surroundings 3

Tests

Tests - Burning Rate

Tests - Burning Test For Solids

Tests - Drop Hammer Test

Tests - Steel Cartridge Test

Thermal Explosion Theory

Thermal unstable substances


Resources / Downloads

34 entries found!

ABS consulting

Akzo Nobel Safety Services

An Introduction to Fire Dynamics

Centre for Technical Training

CheckIT

Comit? Mercosur de normalizaci?n

Confederaci?n General de la Industria

Conseil canadien des normes

Conservation of clean air and water in Europe

Department of Fire Safety Engineering, Lund University

Design Institute for Emergency Relief Systems (DIERS)

Deutsches institut f?r normung (DIN)

Enclosure Fire Dynamics

European Process Safety Centre

Federaci?n Empresarial de la Industria Qu?mica Espa?ola (FEIQUE)

FEU

FLACS Newsletter

IChemE

Information society Standardization system (ISSS)

Institut Fran?ais du P?trole

Internet Engineering Task Force (IETF)

Introduction to Dust Cloud Explosions

Introduction to the systematic assessment of thermal risks of chemical reactions

Manual of Tests and Criteria

Ministerio de Trabajo y Asuntos Sociales, Instituto Nacional de Seguridad e Higiene Industrial

National resource for global standards (NSSN)

Pan-American Standards Commission site (COPANT)

Process Safety and Environmental Protection (PSEP)

Reproductive accuracy of generic Omega Parameter safety valve two phase critical mass flow models based on water and refrigerant R134a data

South African bureau of standards.

The SFPE Handbook of Fire Protection Engineering

Thermal Safety Software (TSS) - CISP

VTT - ALARP

World standards services network (WSSN)


Research projects

36 entries found!

A model of health risk evaluation
A model of health risk evaluation.

ALARP
ALARP - Aineisto LAitoksen elinkaaren Riskianalyysi- ja Prosessiturvallisuuskoulutukseen. (Finnish)
Public training material regarding safety analysis and process safety issues at the different life-cycle stages of chemical processes and proces

BEQUAR
The project consists of a benchmark with the main objective of: (i) conducting independent reviews of an existing risk analysis study of a reference Seveso establishment, and (ii) assessing the risk in the selected impact area. The overall e

CHAF
Serious explosion accidents have occurred in EU countries that have involved the bulk storage of display fireworks. Currently, there is no means of estimating the hazards posed by such storage and the UN transport classification scheme is all that ca

Development of Fine Chemical?s advanced processes. (Desarrollo de procesos avanzados de Qu?mica Fina) (DPAQ)? Doctoral Thesis
The objective of the present project is to solve the safety problems existing in the main fine chemicals discontinuous processes. In the approved projects PB98-0410 and PPQ2002-01806, the main target of the work was to obtain macrocyclic lactones as

e-Seveso
e-Seveso wants to deploy a service through Europe for monitoring the management Security that increases the collective protection of people, goods and environment by means of the effective sharing of the resources of the Information and Communication

eRisk
The aim of the eRisk project is to develop a new concept for networking different risk management organisations and services. The eRisk concept is based on the Finnish Risk Management Toolkit (www.pk-rh.com). The new concept will be a modular, custom

EU-RAIN
Risk analysis is the scientific approach to producing safe food and is the cornerstone of new EC food safety legislation. Risk analysis may be divided into risk assessment, risk management and risk communication. This project will provide a database

EUFRAM
The project will join researchers with end-users and stakeholders in a concerted action to address the key issues identified by EU Pesticide Risk Assessment workshop (EUPRA). The EUPRA. workshop concluded that probabilistic methods would provide impo

EXPRO
This experimental/ theoretical/numerical project aims at revealing the physical-chemical mechanisms of explosion, and at deriving innovative methods for explosion protection. Both LES and VLES modelling strategies, with appropriate models for combust

FIREDETEX
The development of a new large passenger aircraft with two or even three deck configuration requires new ways in defining passenger safety. As one major goal, f ire safety has to be improved to enhance today's level of safety. A next generation fire

Generalized criteria for assessing thermal stability of discontinuous reactors? Doctoral Thesis
The thesis has been undertaken with the main purpose of developing intrinsic criterion that would allow the prevention of thermal runaway for any process carried out in discontinuous reactors (batch and semi-batch processes). Intrinsic criteria, b

HEMIND
Design, Prototype and Manufacture a helmet system for Fire-fighters, equipped with a high resolution, miniature, viewer and an autonomous, portable, computer system capable of presenting, overlapped to the normal viewing field of the user, images fro

Improvement of an industrial process for the production of cyclic macrolactones (MLC) ? Doctoral Thesis
The aim of this work is basically centred in the improvement and industrialization of the production of macrocyclic lactones (C11 and C16) through the Story synthesis useful as raw materials for high performance linear polyesters. As a starting point

Methodologies for thermal risk analysis of discontinuous chemical processes (Metodologies per l?an?lisi del risc t?rmic de processos qu?mic discontinues) ? Doctoral Thesis
The project presents a comparative analysis of methodologies to realise studies on thermal security of chemical reactions, in discontinuous mode, currently used in several research centres. Furthermore, the project presents an analysis of its use bas

Methodologies for thermal risk analysis of discontinuous chemical processes (Metodologies per l?an?lisi del risc t?rmic de processos qu?mics discontinus) ? Doctoral Thesis
The objective of the present project is to solve the safety problems existing in the main fine chemicals discontinous processes. In the approved projects PB98-0410 and PPQ2002-01806, the main target of the work was is obtaining of macrocyclic lactone

NANOPROP
Innovative polypropylene nanocomposites will be developed for automotive and electronics applications. Nanocomposites will be prepared by exfoliation of modified nanometer-thick clay platelets in both virgin and modified polypropylenes. Innovative, e

NEDIES
Specific Objectives -To provide scientific and technical assistance to DGENV on the formulation, implementation and monitoring of EU policy on the control of major hazards and the prevention and mitigation of major accidents; -To manage the Europ

Network on safety problems resulting from runaway reactions in the chemical reactions

PK-RH
The basic idea was to raise the competence in SMEs to such a level that they could implement systematic risk management. The aim was to improve the overall knowledge of the different areas of risk management in SMEs.

During the project, fo

PRESAFE
Main goal of PRESAFE is to create a strong centre providing services for the parties interested in pressure equipment safety. Second goal is to construct a network, which will be an extension of existing EPERC network. This will be achieved through a

RASE
The aim of this project was to develop a European standard which will enable manufacturers to simply and quickly assess the process parameters, identify the hazardous situations and evaluate the risks of both equipment and protective systems associat

Reaction calorimetry under reflux conditions (Calorimetr?a de reacci?n en condiciones de reflujo) ? Doctoral Thesis
This work is the first Doctoral Thesis on the use of the technique called calorimetry of reaction, in the research program about Productos Qu?micos de Alta Tecnolog?a, PQAT, of the Department of Chemical Engineering of the CETS Institut Qu?mic of Sar

SAFE PROPULSOR
Currently used design tools and methods for ship propeller design are not able t o predict the effects of scientific phenomena like cavitation, vortices and propeller hull interaction, some of these phenomena are not completely understood. For this r

SAFE TUNNEL
SAFE TUNNEL main objective is to contribute to reduce the overall number of accidents inside road tunnels through preventive safety measures. Great attention will be paid to achieve a dramatic decrease of the "fire accidents". Concretely the project

SAFEGAS
Semiconducting oxide sensors (e.g. Tagushi-sensors) used for olfactory imaging at present are inherently too slow to provide instantaneous response required for real-time process monitoring and control in the industry. Besides they are prone to humid

SAFEPARK
Chemical Parks: Guidance on good practice and factors influencing the division and sharing of responsibility between landlord and operator. (Note: the project is 'shelved' because it didn't pass the acceptance criteria of the European Commission.)

SAFERELNET
Thematic Network concerned with providing safe and cost effective solutions to industrial products, systems, facilities and structures across different industries. The scope of the project is the integrated treatment of the important aspects of desig

SAFET

SHAPE-RISK
SHAring exPErience on RISK management (Health, Safety and Environment) to design future industrial systems.

SIRTAKI
SIRTAKI plans to improve tunnel safety by the development and assessment of an advanced tunnel management system that specifically tackles (i) safety issues and emergencies and (ii) the integration within the overall network management. The benefits

SPASE
Small Plants - Assistance with Safety and Environment (ENV4-CT96-0280)

Technological and natural risks
To manage the EPERC network and maintain the EPERC website on a day-to-day basis under the guidance of the Steering Committee in order to: 1. provide technical expertise to DG ENTR in support of the PED and of the harmonised standards required for

TEST-PRO-SAFETY-LIFE
The main objective of the proposed project is intensifying, improving and strengthening the Centre's links with its leading European counterparts in the areas of improving safety of products used at work places - machines and personal protective equi

Turvalliset ty?tavat
Safe Work Practices project - a national research project focused on developing and exploiting behaviour modification programmes integrated with safety leadership promotion in order to improve the safety culture in Finnish companies.

UPTUN
The Common Transport Policy is one of the original ingredients of the first European treaty (Treaty of Rome). Tunnels are important in the existing and envisaged transport system. However, the safety of tunnels was put in question after recent fires,


Legislation & Standardisation

52 entries found!

1973/23/EEC, electrical equipment
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits

1999/92/EC, safety and health protection of workers potentially at risk from explosive atmospheres
Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres (15th individual Directive within

2000/39/EC, protection of workers from the risks related to chemical agents
Commission Directive 2000/39/EC of 8 June 2000 establishing a first list of indicative occupational exposure limit values in implementation of Council Directive 98/24/EC on the protection of the health and safety of workers from the risks related to

2000/54/EC, protection of workers from risks related to exposure to biological agents
Directive 2000/54/EC of the European Parliament and of the Council of 18 September 2000 on the protection of workers from risks related to exposure to biological agents at work (seventh individual directive within the meaning of Article 16(1) of Dire

2001/26/EC, transport of dangerous goods by road
Directive 2001/26/EC of the European Parliament and of the Council of 7 May 2001 amending Council Directive 95/50/EC on uniform procedures for checks on the transport of dangerous goods by road (Text with EEA relevance)

2001/45/EC, safety and health
Directive 2001/45/EC of the European Parliament and of the Council of 27 June 2001 amending Council Directive 89/655/EEC concerning the minimum safety and health requirements for the use of work equipment by workers at work (second individual Directi

2001/58/EC, dangerous substances
Commission Directive 2001/58/EC of 27 July 2001 amending for the second time Directive 91/155/EEC defining and laying down the detailed arrangements for the system of specific information relating to dangerous preparations in implementation of Articl

2001/59/EC, classification, packaging and labelling of dangerous substances
Commission Directive 2001/59/EC of 6 August 2001 adapting to technical progress for the 28th time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and l

2001/60/EC, classification, packaging and labelling of dangerous preparations
Commission Directive 2001/60/EC of 7 August 2001 adapting to technical progress Directive 1999/45/EC of the European Parliament and of the Council concerning the approximation of the laws, regulations and administrative provisions of the Member State

2001/95/EC, general product safety
Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety (Text with EEA relevance)

2002/44/EC, health and safety - risks arising from physical agents
Directive 2002/44/EC of the European Parliament and of the Council of 25 June 2002 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration) (sixteenth individual Directive w

2002/62/EC, marketing and use of certain dangerous substances and preparations
Commission Directive 2002/62/EC of 9 July 2002 adapting to technical progress for the ninth time Annex I to Council Directive 76/769/EEC on the approximation of the laws, regulations and administrative provisions of the Member States relating to rest

2002/80/EC, air pollution by emissions from motor vehicles
Commission Directive 2002/80/EC of 3 October 2002 adapting to technical progress Council Directive 70/220/EEC relating to measures to be taken against (Text with EEA relevance.)

2003/10/EC, health and safety
Directive 2003/10/EC of the European Parliament and of the Council of 6 February 2003 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (noise) (Seventeenth individual Direct

2003/18/EC, health and safety
Directive 2003/18/EC of the European Parliament and of the Council of 27 March 2003 amending Council Directive 83/477/EEC on the protection of workers from the risks related to exposure to asbestos at work (Text with EEA relevance)

2003/36/EC, restrictions on the marketing and use of certain dangerous substances and preparations
Directive 2003/36/EC of the European Parliament and of the Council of 26 May 2003 amending, for the 25th time, Council Directive 76/769/EEC on the approximation of the laws, regulations and administrative provisions of the Member States relating

2003/53/EC, restrictions on the marketing and use of certain dangerous substances and preparations
Directive 2003/53/EC of the European Parliament and of the Council of 18 June 2003 amending for the 26th time Council Directive 76/769/EEC relating to restrictions on the marketing and use of certain dangerous substances and preparations (nonylphenol

2003/87/CE, scheme for greenhouse gas emission allowance
Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a scheme for greenhouse gas emission allowance trading within the Community and amending Council Directive 96/61/EC

2004/37/EC, health and safety
Directive 2004/37/EC of the European Parliament and of the Council of 29 April 2004 on the protection of workers from the risks related to exposure to carcinogens or mutagens at work (Sixth individual Directive within the meaning of Article 16(1)

2004/40/EC, health and safety
Directive 2004/40/EC of the European Parliament and of the Council of 29 April 2004 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (18th individua

89/654/EEC, safety and health
Council Directive 89/654/EEC concerning the minimum safety and health requirements for the workplace (first individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

89/655/EEC, minimum safety and health requirements for the use of work equipment
Council Directive 89/655/EEC of 30 November 1989 concerning the minimum safety and health requirements for the use of work equipment by workers at work (second individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

89/656/EEC, health and safety
Council Directive 89/656/EEC of 30 November 1989 on the minimum health and safety requirements for the use by workers of personal protective equipment at the workplace (third individual directive within the meaning of Article 16 (1) of Directive 89/3

91/383/EEC, safety and health (temporary employment)
Council Directive 91/383/EEC supplementing the measures to encourage improvements in the safety and health at work of workers with a fixed- duration employment relationship or a temporary employment relationship

92/104/EEC, protection of workers in surface and underground mineral-extracting industries
Council Directive 92/104/EEC of 3 December 1992 on the minimum requirements for improving the safety and health protection of workers in surface and underground mineral-extracting industries (twelfth individual Directive within the meaning of Article

92/57/EEC, safety and health
Council Directive 92/57/EEC of 24 June 1992 on the implementation of minimum safety and health requirements at temporary or mobile construction sites (eighth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

92/58/EEC, safety and health
Council Directive 92/58/EEC of 24 June 1992 on the minimum requirements for the provision of safety and/or health signs at work (ninth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

92/91/EEC, protection of workers in the mineral- extracting industries
Council Directive 92/91/EEC of 3 November 1992 concerning the minimum requirements for improving the safety and health protection of workers in the mineral- extracting industries through drilling (eleventh individual Directive within the meaning of A

93/68/EEC, individual protection equipment
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (per

94/55/EC, transport of dangerous goods by road
Council Directive 94/55/EC of 21 November 1994 on the approximation of the laws of the Member States with regard to the transport of dangerous goods by road

95/63/EC, safety and health
Council Directive 95/63/EC of 5 December 1995 amending Directive 89/655/EEC concerning the minimum safety and health requirements for the use of work equipment by workers at work (second individual Directive within the meaning of Article 16 (1) of Di

96/35/EC, transport of dangerous goods by road, rail and inland waterway
Council Directive 96/35/EC of 3 June 1996 on the appointment and vocational qualification of safety advisers for the transport of dangerous goods by road, rail and inland waterway

96/49/EC, transport of dangerous goods by rail
Council Directive 96/49/EC of 23 July 1996 on the approximation of the laws of the Member States with regard to the transport of dangerous goods by rail

96/86/EC, transport of dangerous goods by road
Commission Directive 96/86/EC of 13 December 1996 adapting to technical progress Council Directive 94/55/EC on the approximation of the laws of the Member States with regard to the transport of dangerous goods by road (Text with EEA relevance)

97/53/EC, electrical equipment for use in potentially explosive atmospheres
Commission Directive 97/53/EC of 11 September 1997 adapting to technical progress Council Directive 79/196/EEC on the approximation of the laws of the Member States concerning electrical equipment for use in potentially explosive atmospheres employin

97/64/EC, restrictions on the marketing and use of certain dangerous substances and preparations
Commission Directive 97/64/EC of 10 November 1997 adapting to technical progress for the fourth time Annex I to Council Directive 76/769/EEC on the approximation of the laws, regulations and administrative provisions of the Member States relating to

98/24/EC, protection of workers from the risks related to chemical agents
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC)

98/433/EC, major-accident
98/433/EC: Commission Decision of 26 June 1998 on harmonised criteria for dispensations according to Article 9 of Council Directive 96/82/EC on the control of major-accident hazards involving dangerous substances (notified under document number C(1

98/73/EC, classification, packaging and labelling of dangerous substances
Commission Directive 98/73/EC of 18 September 1998 adapting to technical progress for the 24th time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and

98/98/EC, classification, packaging and labelling of dangerous substances
Commission Directive 98/98/EC of 15 December 1998 adapting to technical progress for the 25 time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and la

Act No. 114/1995 Coll.
Act No. 114/1995 Coll., on inland waterways as last amended and also Ministerial Decree No. 222/1995 Coll., on inland waterways, waterway transport and transport of dangerous goods.

Dz.U. 2002 r. Nr 199, poz. 1671 - 96/35
The Law 28 October 2002 on the carriage of dangerous goods by road (Dz.U. 2002 r. Nr 199, poz. 1671); - Regulation of the Minister of Infrastructure dated 23 December 2002 on granting the training certificates to safety advisers in the scope of the c

GGBefG Gefahrgutbef?rderungsgesetz
94/55/EC, 96/49/EC: "Gefahrgutbef?rderungsgesetz - GGBefG" (Dangerous Goods Transportation Act) together with "Gefahrgutverordnung Star?e und Eisenbahn - GGVSE" (Ordinance on the Transport of Dangerous Goods by Road an drail) and "Gefahrgut-Ausnahmev

Government decree No. 2/2002.(I.11.)Korm.
Government decree No. 2/2002.(I.11.)Korm. On the appointment and vocational qualification of safety advisers for the transport of dangerous goods by road, rail and inland waterway; No. 8/2002.(I.31.)K?ViM on the examinations of DGSA (corresponding to

Government Resolution No. 1778
Resolution as concerns the inspection system on the transport of dangerous goods (Government Resolution No. 1778 on Inspection of Transport of Dangerous Goods by Road, Rail and Inland Waterway, adopted on 13 November 2002)

Government Resolution No. 337
Resolution as concerns the rules of transportation of dangerous good by road within teritory of Lithuania (Government Resolution No. 337 on Transport of Dangerous Goods by Road, adopted on 23 March 2000)

Government Resolution No. 84
Resolution as concerns the rules of transportation of dangerous good by rail within teritory of Lithuania (Government Resolution No. 84 on Transport of Dangerous Goods by Rail, adopted on 22 January 2002)

IEC/TR 60079-12 - Ed. 1.0 - Bilingual, explosive gas atmospheres
Electrical apparatus for explosive gas atmospheres - Part 12: Classification of mixtures of gases of vapours with air according to their maximum experimental safe gaps and minimum igniting currents

Orders No. 3-343, No. 3-274
In 2002 Minister of Transport and Communications of Lithuania issued orders: No. 3-343 on the appointment of safety advisers for the transport of dangerous goods by road, rail and inland waterway, issued 4 July 2002; No. 3-274 on the vocational train

prEN 14591-2 (2005).
prEN 14591-2 (2005). Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers

Regulations of CoM Nr 222
Regulations of CoM Nr 222 "On control in the field of road transport (20.06.96), with amendments 14.03.2000.

Statutory Instrument 2004/568 (94/55/EC)
Statutory Instrument 2004/568 (ISBN 0110490630) - "The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2004". This is consolidated legislation for road and rail for Great Britain (Northern Ireland are finalising si


Web Links

57 entries found!

ALARP - Aineisto LAitoksen elinkaaren Riskianalyysi- ja Prosessiturvallisuuskoulutukseen
Finnish. Public training material for the full life-cycle safety analysis of process plants. Provides process industry educators and company employees with easy access to information on safety perspectives that are essential for specific processes.

American Institute of Chemical Engineers
Portal of the Center for Chemical Process Safety within the website of American institute of Chemical Engineers. A one-stop source for Process Safety information and tools.

American Institute of Chemical Engineers
A checklist for inherently safer chemical reaction process design and operation

Analysis of Volume Imaging Lidar Signals
This thesis presents a study of signal analysis methods for measuring convective boundary layer mean depths, cloud base altitudes, cloud top altitudes, cloud coverages, and mean wind profiles in the atmospheric boundary layer from data obtained with

Bachinformationen within the website of Berufsgenossenschaftliches Institut f?r Arbeitsschutz
Website offers an access to a database of MSDS from different chemical industries. Information depends on the chemical industries.

Bodner research web
Bodner research web: Theoretical explanation on chemical reactions and kinetics

Boundary Layer within the website of Wright Brothers-NASA

CCPS-AIChE
A checklist for inherently safer chemical reaction, process design and operation

CFD online
CFD Online is a web portal for Computational Fluid Dynamics (CFD) Collection of links to electronic information related to Computational Fluid Dynamics. The aim is to give an overview of the vast resources available on the net for people working wi

Chemical Emergency Preparedness and Prevention within the website of U.S. Environmental Protection Agency
Computer Modelling Program for Risk Management Plans

Chemical Engineering and Applied Chemistry University Torronto
Information about Chemical Reaction Hazards - Basic Toxicology - MSD

Chemical Industry Federation of Finland
The chemical industry is the third largest branch of industry in Finland after the forest industry and the metal, engineering and electronics industry in terms of both gross output and value added. The site provides information about the state of the

Chemical Resistant Gloves Guide within the website of Oxford University
link in the Web site of the Univerity of Oxford for the The Physical and Theoretical Chemistry Laboratory. Includes MSDS'es, toxicity data, exposure limits, PPE's Information is not validated.

CHETAH
The CHETAH program is a unique tool for predicting both thermochemical properties and certain "reactive chemicals" hazards associated with a pure chemical, a mixture of chemicals, or a chemical reaction. This is accomplished through a knowledge of on

Department of Plant and Soil Sciences (Oklahoma State University)
Contains links to software and related documentation developed as research tools, instructional aids, and decision-support systems for managing soil and water resources. All of this software was written in Java and utilizes the Sun Microsystems Java

Emergency preparedness & response within the website of Centers for disease control and prevention

Emergency response resources within the website of Niosh

Endothermic Reaction
Chemical reaction where the energy content of the products is more than that of the reactants; heat is taken in by the system

Epsilon Compliance
Site containing details of directives and standards for explosive atmosphere compliance and testing. Epsilon is a privately owned ATEX Notified Body with CE Test Facilities in the U.K.

Exothermic
Chemical reaction where the energy content of the products is less than that of the reactants; heat is given out from the system.

Experimental data acquisition for validation of a new vapour cloud fire (VCF) modelling approach
The report describes trials undertaken by the Health and Safety Laboratories with the aim of producing data for the validation of computer models

explosion within engineering toolbox

Fire research within the website of National Institute of Standards and Technology
Information about fire research

Fire Safety Engineering Research & Technology Centre
The Institute of Fire Safety Engineering Research and Technology (FireSERT) combines a multi-disciplined team of scientists and engineers in an unique laboratory facility on the Island of Ireland within the Universities of the UK.

Gexcon
GexCon is an independent consulting company operating in the field of gas and dust explosion safety. Ventilation, dispersion and explosion analyses are performed with the CFD-code FLACS.

Greek Health and Safety Institute
Portal of the Greek Health and Safety Institute with reports, manuals and on line library consultation.

HARSNET - Thematic network on hazard assessment of highly reactive systems
An extensive forum within which universities, research centres and industries collaborate to develop and disseminate fundamental knowledge that can be used for hazard assessment of reactive systems, in order to improve the global safety of the chemic

ICC The Compliance Center - European SDS
European MSDS requirements within the website of the ICC The Compliance Center.

INBUREX Consulting
International safety consultancy organisation with own test laboratories. Specialising in Fire and Explosion, ATEX, Electrostatics, Process Safety, Reaction Hazards, Venting and Emergency Relief systems, Transport, Safety Management, Risk Assessments

Information and references to chemical safety within the website of Institut National de Recherche et de Securite
Internet references may found here where to find MSDS.

International chemical safety cards within the website of Centers for disease control and prevention
INTERNATIONAL PROGRAMME ON CHEMICAL SAFETY International Chemical Safety Cards (ICSCs)

International Confederation for Thermal Analysis and Calorimetry (ICTAC)
ICTAC has the aim of promoting international understanding and cooperation in these branches of science through activities within its Scientific Committees, congresses to exchange information, and coordinating efforts towards standardization and nome

International water msit association
The international water mist association is the first association of its kind dedicated exclusively to water mist fire fighting and related technology.

Loss of PLANOP:A method for performing loss of containment analyses
This report presents a profile of incidents that result in loss of containment within the UK and try to identify the underlying factors that led to the incident.

MHIDAS (Major Hazard Incident Data Service) within the website of Health & Safety Executive
MHIDAS is maintained by AEA Technology plc, on behalf of the UK Health and Safety Executive. Information from MHIDAS can be accessed: through a personalised service, provided on a fee basis through AEA Technology, or on a subscription basis, via

Modelling and numerical simulation within the webpage of University of Minnesota
This web-site contains a paper published by the author of the site. Nevertheless, the information can be valuable for persons who are looking for detailed information concerning particle flow.

Molecular diffusion coefficients
Calculation of molecular and ionic diffusion coefficients in sea water or in pore water of a sediment column

MSDS
A pyrophoric material can spontaneously ignite in air. The word is derived from Greek for "fire-bearing". Many pyrophoric materials are also water reactive, reacting vigorously with water or high humidity, often igniting upon contact

Network Science
NetSci is a combination of scientific focus articles and general resources for scientists within the pharmaceutical and biotechnology industries. Contains little information on Process Safety

Nist Chemical Kinetics model database
It provides detailed chemical kinetic models, along with supporting data and information, used in combustion modeling applications.

Notified bodies por equipment intended for use in potentially Explosive Atmospheres (ATEX)
UE site with a list of notified bodies under Directive 94/9/EC Equipment and protective systems intended for use in potentially explosive atmospheres.

Pesticide documents within the website of Inchem
IPCS INCHEM is a means of rapid access to internationally peer reviewed information on chemicals commonly used throughout the world, which may also occur as contaminants in the environment and food. It consolidates information from a number of interg

Physikalisch-Technische Bundesanstalt
The Physikalisch-Technische Bundesanstalt (PTB) is the national metrology institute providing scientific and technical services. PTB measures with the highest accuracy and reliability - metrology as the core competence.

Reaction Inhibition in the Control of Exothermic Runaway
Research programme on the use of the chemical inhibition techniques as a Basis of Safety for the control of exothermic runaway reaction hazards.

RSC: Advancing the chemical sciences
there is a need to provide some basic guidance on safety issues raised by the scale up of chemical reactions from laboratory scale to full sized commercial plant. this page provides of EHSC notes on Safety Issues in the Scale up of Chemical Reactions

Safestartup.org
Presented by the Institution of Occupational Safety and Health (IOSH). Basic information on how to comply with Health, Safety and Environmental regulations for start-up companies and small businesses.

Safety Pages
Link page full with links to relevant safety pages. Not all links updated though.

SME Risk Management Toolkit
Provides a wealth of information and many tools for SMEs interested in risk management. Quickly accessible, this extensive Toolkit offers practical assistance for many risk management needs. Covers general risks - i.e. not specific to process risk. A

Steady-State Non-Isothermal Reactor Design
This apge shows you how is the Steady-State Non-Isothermal Reactor Design Lecture (with audio explanation)

SYSTAG top of technology
Information on reaction calorimeters and calorimetry

Testing methods within the website of European Chemical Bureau

The Chemical database within the website of University of Akron
United States. This website contains a chemical database, which will allow the user to retreive information for any of 23,495 hazardous chemicals or 'generic' entries based on a keyword search. Potential keywords include names, formula and registry

The Institute of the Fire Department of Saxony-Anhalt
The Institute is a public research establishment under the Ministry of the Interior of the Land of Saxony-Anhalt. Scientific and technical problems of fire protection (with the focus on fire defence) are being worked on in a cross-disciplinary way. R

Toxicologic information on chemical substances within the website of the AIMT du Bas-Rhin.
This site provides links to other websites where different technical and medical data may be found. Websites are briefly described.

University of Michigan
This page shows an advanced search of runaway reactions.

Wolfram Research - Scienceworld - Turbulence
Eric Weisstein's World of Science contains budding encyclopedias of astronomy, scientific biography, chemistry, and physics. This resource has been assembled over more than a decade by internet encyclopedist Eric W. Weisstein with assistance from the

Wordswork consulting
Information about reaction calorimetry


Glossary

26 entries found!

Bursting discs (Chemical reactions)

Chemical reaction hazards

Chemical reactions

Contamination of water

Data on chemicals and chemical reactions

Decomposition reactions

Enthalpy of reaction

Extinguishing water containment

Flammability - Pyrophoric properties of solids and liquids(contact with water causing fire)

Heat of reaction

Heat transfer for chemical reactions

Hybrid system (reaction)

Maximum temperature attainable by the synthesis reaction (MTSR)

Molten metal-water

Prevention of runaway reactions

Protection/Mitigation of runaway reactions

Rate of reaction

Reaction calorimetry (RC)

Reaction type

Reaction with water

Runaway reactions

Scale-up of reactions

Sensitivity of reactions

Thermal reaction number B

Water contamination

Water solubility


277 entries found!

Accident

Activation energy

Adiabatic

Adiabatic measurement method

Adiabatic temperature rise

Aerosol explosion

Anchoring Error

Arrhenius diagram

Arrhenius law

Authorities

Authority Gradient

Autocatalytical

Autoignition temperature

Automated labs

Backdraft

Basic concepts

Basic terms (General concepts)

Batch process

Batch reactor

Behaviour modification

Best Available Technology (BAT)

Body protection Garments

Boiling liquid expanding vapour explosion (BLEVE)

Boiling point

Bomb calorimetry

Breathing apparatus

Bubble column reactor

Burning rate

Calvet calorimetry

Catalytical (Heterogeneous)

Catalytical (Homogeneous)

Category 1

Category 2

Category 3

Cause-consequence analysis

Chemical compatibility

Chemical kinetics

Classical continuous reactors

Collecting containers and transport systems

Compatibility charts

Computational fluid dynamics (CFD)

Concept and magnitudes that can be found in MSDS

Consequence analysis

Contamination of reactants

Continuous stirred tank reactor (CSTR)

Convection

Cost-Benefit analysis

Damk?hler-number Da

Dangerous substances / Dangerous goods

Decomposition onset temperature

Decomposition temperature

Design standard

Dewar calorimetry

DIERS methodology

Discretisation scheme

Dissipative materials

Drop calorimetry

Dump or quench vessel

Dust explosion

Early warning detection system

Electrical resistivity of a layer

Emergency pressure relief design

Emergency relief system

Emergency Response Planning Guideline (ERPG)

Emergency response vehicles

Emulsion reactor

Endothermic

Energy potential

Environmental effects

Error

Establishment

Event tree analysis (ETA)

Exothermic

Explosion protection

Explosive atmosphere

Explosives

Eye wash station

F-N Diagrams

Face and eye protection

Face shields

Failure mode and effect analysis (FMEA)

Fault tree analysis (FTA)

Filtering respirators

Fire

Fire compartment boundaries

Fire compartments

Fire consequences

Fire extinguishing

Fire extinguishing agents and additions

Fire extinguishing equipment and hoses

Fire extinguishing installations and systems

Flame arrestors

Flame proof

Flameproof enclosure

Flammable gases

Flammable vapours

Flammables

Flash over

Fluidised bed reactor

Foot and Leg Protection

Frequency analysis

Frequency factor

Friction Sensitivity

Fuel-air explosions

Full scale process

Gas explosion

Gas production

Gassy system

Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

Gloves

Goggles

Group II (Flammable gasses)

Group II (Flammable vapours)

Guarding

Hard (safety) Hats

HarsMeth methodology

Hazard

Hazard identification

Heat accumulation

Heat balance calorimetry

Heat capacity

Heat of decomposition

Heat transfer for industrial fires

Heavy gases

Heterogeneous

High Reliability Organisations (HROs)

Homogeneous

Human Factors (or Human Factors Engineering)

Human factors integration

Hybrid mixture

Ideal gas constant

Immediately dangerous to life or health (IDLH)

Incident

Incompatibility / Reactive interactions

Increased safety

Independent Protection Layer (IPL)

Industrial fires

Ingress protection

Installation

International standards and guides for the compilation of MSDS

Intrinsic safety

Isoperibolic

Isoperibolic calorimetry

Isothermal

Isothermal calorimetry

Isothermal measurement method

Jet fire

KG-value

Kinetic analysis

Kinetic model

Learning Curve

Linearly increasing temperature method

Loop reactor

Low and high temperature exposure

Lower Explosible Limit (LEL)

Maciejasz Index (MI)

Maldistribution

Mass transfer

Material compatibility

Material safety data sheets (MSDS)

Maximum allowable pressure

Maximum pressure rise rate

Maximum temperature rise rate

Measurement methods

Measurement methods in industrial fires

Melting / freezing temperature

Methods for the determination of physico-chemical properties

Micro-reactors

Microcalorimetry

Minimum explosive concentration (MEC) or Lower explosive limit (LIE)

Minimum ignition current (MIC)

Minimum ignition temperature (MIT layer and cloud)

Mistakes

Mock-up

Modelling software

Modelling, simulation and optimisation

Modulated differential scanning calorimetry (mDSC)

Monitoring the explosive atmosphere

Neutral gases

Non-catalytical

Online warning system

Open crucibles

Other continuous and semi-continuous reactors

Other reactor type

Oxidant atmosphere

Oxidizing properties (solids)

Partition coefficient

Passive safety

Peak pressure

Phase transfer controlled

Plant and Process Safety

Plug flow reactor (PFR)

Pool fire

Powered respirators

Preliminary hazard analysis (PHA)

Pressure at maximum rise rate

Pressure shock + resistant

Pressurisation

Quench / Dump tank

Quenching / Dumping

Radiation

Reactive distillation

Reactive interaction

Reactive material

Reactivity

Reactor / plant size

Reactor type

Read-Backs

Reburning

Relative density

Release protection

Reliability of MSDS

Respiratory protective equipment

Risk

Risk reduction

Runaway scenario

Safety cabinets

Safety culture

Safety Instrumented Function (SIF)

Safety shoes

Safety shower

Screening methods & classification

Self-heating rate

Self-ignition of stored materials

Semi-batch process

Semi-batch reactor

Smoke development

Smoke production

Specific heat capacity

Specific latent heat of fusion

Specific latent heat of vaporisation

Sphere - 20-litre

Spontaneous decomposition (bulk deposit)

Sprinkler

Stanton number St

Static mixer

Stirred discontinuous tank reactor

Success likelihood index methodology (SLIM)

Suppressant material

Swiss Cheese Model

Systems Approach

Technical inspection

Technique for human error rate prediction (THERP)

Temperature mode

Tempered system

Thermal activity monitoring system (TAMS)

Thermal inertia Φ

Thermal Instruments

Thermal radiation (Modelling, simulation and optimisation)

Thermal stability measurement

Thermogravimetric analysis (TGA)

Threshold limit value (TLV)

Threshold limit value/time weighted average (TLV/TWA)

Toxicity from combustion gases

Trickle flow reactor

Turbulence

Two-phase flow

Types of explosion other than fuel-oxidant

Uncertainty

Unexpected Reactors

Upper Explosion Limit (UEL)

Vapour density

Vapour pressure

Vapour system

Vent type and size

Vessel - 1 m?

Vessels

Warning equipment

Zone 0

Zone 1

Zone 2

Zone 20

Zone 21

Zones for dusts

Zones for gases


 
Copyright by S2S - A Gateway for Plant and Process Safety - All Rights Reserved.
Web site engine's code is Copyright © 2003 by PHP-Nuke. All Rights Reserved. PHP-Nuke is Free Software released under the GNU/GPL license.
Page Generation: 0.184 Seconds